E-Mail Us



Product Information

Series D84 Diverter Ball Valves
3 pc. Design Diverter

Bottom Entry

Live Loaded stem 4 Belleville Washers





Click Here for a downloadable and/or printable version of this page.		 Sharpe Valves Series D84
Parts & Identification | Dimensions | Performance Data | How To Order | CAD Drawings
Parts & Identification
Sharpe Valves Series D84 - Parts and Identification
PART NO. PART QTY. MATERIAL
1 Body 1 316 Stainless Steel - ASTM A351 CF8M
Alloy 20 - ASTM A351 CN7M
Carbon Steel - ASTM A216 WCB
2 Pipe Ends 3 316 Stainless Steel - ASTM A351 CF8M
Alloy 20 - ASTM A351 CN7M
Carbon Steel - ASTM A216 WCB
3 Ball 1 316 Stainless Steel
Alloy 20
Monel
Hastelloy C
4 Stem 1 316 Stainless Steel
Alloy 20
Monel
Hastelloy C
5 Valve Seat 2 TFE
Reinforced TFE
Nova*
Delrin
UHMWPE
PEEK
6 Body Seal 3 TFE
Neoprene
Graphoil
UHMWPE
Buna
EPR
7 Thrust Bearing 1 Nova* (UHMWPE with UHMWPE Seats)
7A Stem Location Ring (3" & 4") 1 Stainless Steel
8 Thrust Bearing 1 PEEK (UHMWPE with UHMWPE Seats)
8A Thrust Bearing 1 Nova* (UHMWPE with UHMWPE Seats)
9 Stem Packing 2 Nova* (UHMWPE with UHMWPE Seats)
9A Stem Packing (3" & 4") 3 Nova* (UHMWPE with UHMWPE Seats)
10 Seal Protector 1 PEEK
11 Gland Packing 1 Stainless Steel
12 Belleville Washer 2 Stainless Steel
13 Packing Nut 1 Stainless Steel
14 Lock Tab 1 Stainless Steel
15 Lower Lock Latch 1 Stainless Steel
15B Upper Lock Latch Bolt 1 Stainless Steel
15C Latch Bolt 1 Stainless Steel
16 Handle (1/4" - 2") 1 Stainless Steel
16A Wrench (3" - 4") 1 CAD Plate Carbon Steel
16B Wrench Block 1 Stainless Steel
16C Hex Head Bolt 1 Stainless Steel
17 Lock Washer 1 Stainless Steel
18 Handle Nut (1/4" - 2") 1 Stainless Steel
19 Body Bolts 8 Stainless Steel
19A Body Connector Nut 16 Stainless Steel
20 Nuts 8 Stainless Steel
20A Nuts 16 Stainless Steel
21 Stop Pin (1/4" - 1/2") 1
2		 Stainless Steel
Stainless Steel
21A Stopper 1 Stainless Steel
22 Seat
Retainer		 1
1		 Stainless Steel
Carbon Steel
* Nova: Carbon and Graphite Filled Teflon
back to top
Dimensions
Sharpe Valves Series D84 - Dimensions
SIZE A B C D E F G L M N Q R T V Bottom
Port		 CV*
US GAL.
GPM
1/2" 2.78 2.75 1.50 1.24 1.00 2.05 1.59 3/8" UNF 0.22 1.87 1.00 4.50 M5 0.28 0.47 5
3/4" 2.78 2.75 1.50 1.24 1.00 2.05 1.59 3/8" UNF 0.22 1.87 1.00 4.50 M5 0.28 0.47 5
1" 3.68 3.45 1.75 1.51 1.18 2.42 2.19 7/16" UNF 0.30 2.40 1.18 5.75 M5 0.30 0.63 10
1-1/2" 4.55 4.15 2.25 1.71 1.38 3.16 2.88 9/16" UNF 0.35 3.16 1.38 7.00 M6 0.42 1.05 24
2" 5.00 4.50 2.62 1.87 1.38 3.56 3.06 9/16" UNF 0.35 3.35 1.38 7.00 M6 0.42 1.40 36
2-1/2" 5.86 6.00 3.35 2.92 2.92 4.57 4.56 M20 0.55 5.58 1.25 10.00 M8 0.55 1.84 60
3" 6.66 7.25 5.50 3.87 3.38 6.44 7.25 1.14 UNS 0.745 7.25 1.75 13.80 M10 0.66 2.00 130
4" 8.40 8.60 6.97 4.48 3.38 8.12 7.84 1.14 UNS 0.745 7.84 1.75 22.00 M10 0.66 2.50 240

back to top
Performance Data



FLOW PATTERN
The Diverter Valve is designed to accept media through the bottom and direct the flow to
either of the two outlet ports. Series D84 is available with two different porting configurations.


back to top
How To Order

Valve Size Valve Series Body & Ends Ball & Stem Seat Seal Ends Side Ends Bottom Ball Configurations
1/2"
3/4"
1"
1-1/2"
2"
2-1/2"
3"
4"
 		D84
 		4 = Carbon Steel
6 = S. Steel
2 = Alloy 20
 		6 = 316 S.Steel
2 = Alloy 20
4 = Monel
5 = Hastelloy
 		T = Teflon®
R = Reinforced
      Teflon®
N = Nova
D = Delrin
U = UHMWPE
P = Peek
 		B = Buna
N = Neoprene
V = Viton
T = Teflon®
U = UHMWPE
G = Graphoil
E = Ethylene Propylene
       Rubber (EPR)

 		TE
TEB
BW
SW
 		TE
TEB
BW
SW
 		P1
P2

    TE = Threaded Ends (NPT)
    TEB = Threaded Ends (BSPT)
    BW = Butt Weld
    SW = Socket Weld

    Sample:  3/4"  D84  6  6  T  T  TE/TE  P2

    Teflon® and Viton® are registered trademarks of E.I. Dupont.
    Tri Clamp® is a registered trademark of Tri Clover.
back to top

Sharpe® Valves
Chicago - Headquarters
(877) 774-2773 / (708) 562-9221 / Fax (708) 562-0890
E-mail info@sharpevalves.com