Sharpe® Valves - a division of Sharon Piping

Product Information

Flush Bottom Tank Valves

Flange Made from Solid Bar

Angle Engineered Design

Pipe & Tube Sizes

Click Here for a downloadable and/or printable version of this page.

Features | Dimensions | How To Order

Features

STANDARD FEATURES	ADVANTAGES
Flush Pad Made from Solid Bar	Machined from 316L stainless steel. Eliminates porosity and flaws commonly associated with cast materials. Increases resistance to corrosion.
Angle Engineered Design	Allows ball to extend into tank resulting in reduced dead space where media may accumulate.
Variety of Port Configurations	Valves and their corresponding pads are available in full and standard port pipe dimensions or full port tube dimensions, assuring proper sizing of piping system.
Fully Encapsulated	Allows pad to be directly welded to tank without disassembly of valve.
Integral Mounting Pad	Ideal for actuation. Centering lip feature assures precise alignment of bracket stem and coupler. Allows in-line maintenance of valve without having to remove actuator.
Lockable Handle	All Sharpe® manual Flush Bottom Valves meet OSHA standards with locking device. Restricts valves from being opened or closed accidentally.
Variety of End Combinations	A wide choice of optional end connections are available, including but not limited to, Tri Clamp**, Threaded, Socket Weld, Butt Weld, Grooved, and 150# and 300# flanged.
Choice of Seats & Seals	A wide variety of seat and seal materials are readily available for the most demanding applications, including Buna, Delrin, Nova, Peek, EPDM, Viton, TFE, RTFE, Graphoil, and UHMWPE. Cavity fillers are also available in Teflon®**.
Traceability	Heat numbers are provided on valve bodies, pads and ends. CMTR's (certified mill test reports) are available upon request.
AVAILABLE OPTIONS
Self Draining	Special seats and balls can be supplied to allow the valve to completely drain in the open or closed position.
Purge Ports	Valves can be supplied with purge connections for SIP (steam in place) or CIP (clean in place) applications.
Polishing	Valves can be manually and/or electronically polished (I.D. and/or O.D.) from 180 to 320 grit.
Automation	Valves can be supplied with either pneumatic or electric actuation.
Sharpe® Flush Bottom Tank Valves meet ASME Boiler and Pressure Vessel Code Section 8, Tank Flange Class 150 and 300. * Carbon and Graphite Filled Teflon® Tri Clamp® is a registered trademark of Tri Clover. * Teflon® and Viton® are registered trademarks of E.I. DuPont

Dimensions

SERIES 84				SERIES 88				SERIES 99
SIZE	X	Y	P	SIZE	X	Y	P	SIZE	X	Y	P
1"	3.74	0.79	0.75	1"	3.74	0.79	0.87	1"	3.74	0.79	1.00
1-1/4"	3.74	0.79	1.00	1-1/4"	3.74	0.79	1.12	1-1/4"	5.50	1.10	1.25
1-1/2"	5.50	1.10	1.25	1-1/2"	5.50	1.10	1.37	1-1/2"	5.50	1.10	1.50
2"	5.50	1.10	1.50	2"	5.50	1.10	1.87

SERIES 84				SERIES 88				SERIES 99
SIZE	X	Y	P	SIZE	X	Y	P	SIZE	X	Y	P
2-1/2"	7.00	1.34	2.00	2-1/2"	7.00	1.34	2.37	2"	7.00	1.34	2.00

SERIES 84				SERIES 88				SERIES 99
SIZE	X	Y	P	SIZE	X	Y	P	SIZE	X	Y	P
3"	10.00	1.69	2.50	3"	10.00	1.69	2.87	2-1/2"	10.00	1.69	2.50
4"	11.50	1.93	3.00	4"	11.50	1.93	3.83	3"	11.50	1.93	3.00

How To Order

Valve Size	Valve Series	Body & Ends	Ball & Stem	Seat	Seal	Ends
1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"	84 88 99	6 = Stainless Steel 2 = Alloy 20	6 = 316 S/S 2 = Alloy 20 3 = Monel 5 = Hastelloy C	T = Teflon® R = Reinforced Teflon® N = Nova D = Delrin U = UHMWPE P = PEEK C = Cavity Filled TFE	B = Buna N = Neoprene V = Viton® T = Teflon® U = UHMWPE G = Graphoil E = Ethylene Propylene Rubber (EPR)	TE = Threaded Ends (NPT) TEB = Threaded Ends (BSPT) BW = Butt Weld Sch. 5, 10, 40, & 80 SW = Socket Weld CE = Clamp Ends FB = Flush Bottom

Sample: 1" 84 6 6 T T TE/FB

* Teflon® and Viton® are registered trademarks of E.I. Dupont.

Sharpe® Valves
Chicago - Headquarters
(877) 774-2773 / (708) 562-9221 / Fax (708) 562-0890
E-mail info@sharpevalves.com